輪胎用水性內噴塗
  1. ConLink IP-175:
    以噴嘴噴塗,不掉粉、無粉塵問題,加硫後外觀烏黑,最適合各式斜交胎等生產,包裝為220kg/桶。
  2. ConLink BCIP-2502:
    可不經由水或溶劑稀釋而直接以盤式噴頭噴塗在生胎內面或氣囊 上,且能夠延長氣囊壽命。適用於任何種類的輪胎生產,以及氣囊與生胎的塗佈劑,包裝為220kg/桶。
  3. ConLink IP-194:
    分散好,塗佈快且乾燥時機短,可大大提高生產效能。沒有掉粉問題,加硫後外觀無色,最適合使用於高級轎車胎或一般尺寸之斜交胎等生產。包裝為220kg/桶。

 

Water-based inside paint for tires
  1. ConLink IP-175:
    Applied by air nozzle spray, pitch-black and no drop after tyre vulcanization. Suitable for all kinds of bias tire. Package form is 220kg/drum.
  2. ConLink BCIP-2502:
    Applied by airless disc spray without diluted in the water or solvent, and can also extend the bladder life. Suitable for production of all kind of tires, coating of bladders and green tires. Package form is 220kg/drum.
  3. IConLink P-194:
    It is with good dispersion, coating fast as well as short drying time that can increase the production efficiency. High quality inside paint for both radial and bias tires. Package form is 220kg/drum.
 
© Chief Chemical Company | ALL RIGHTS RESERVED. | Designed by Unique
Tel: +886-2-8671-2994 | Fax: +886-2-8671-4030 | Addr: No.9-12, Tianfu, Sanxia Dist., New Taipei City 237, Taiwan